Page 1 of 1
Action Button - Process Failed - with No Log
Posted: Thu Apr 11, 2024 5:04 pm
by chewza
Hi there
I get a "Process Failed" message from an action button. No error log or entry in Tm1Server log.
Any ideas?
Many thx!
Re: Action Button - Process Failed - with No Log
Posted: Thu Apr 11, 2024 5:23 pm
by Wim Gielis
TM1 Perspectives ? PAfE ? A sheet dragged on a PAW dashboard ?
The process exists ? For instance, in case the process name could be retrieved dynamically from a cell.
Process parameters are fine ?
Re: Action Button - Process Failed - with No Log
Posted: Thu Apr 11, 2024 5:53 pm
by PavoGa
chewza wrote: ↑Thu Apr 11, 2024 5:04 pm
Hi there
I get a "Process Failed" message from an action button. No error log or entry in Tm1Server log.
Any ideas?
Many thx!
Make sure all the parameters you're passing include an "=" in the box. Easy to miss this if using named ranges.
dimAccount (wrong)
=dimAccount (correct)
Re: Action Button - Process Failed - with No Log
Posted: Fri Apr 12, 2024 11:51 am
by EP_explorer
May be user doesn't have rights for the process.
In this case I see the same behaviour
User clicks on button, see error window and nothing in log file
Re: Action Button - Process Failed - with No Log
Posted: Wed Apr 24, 2024 1:52 pm
by ardi
This is an indication that the process did not get triggered at all, and usually this is due to security access or the name of process is not spelled correctly.
If the name of Process is in a reference cell then check the cell, i usually use Named Ranges for process name, process params, and all other properties of action button
Re: Action Button - Process Failed - with No Log
Posted: Fri Apr 26, 2024 8:49 pm
by konstantin-spb
1) No security rights to run the process;
2) There are many models on one server
and a different model is specified for the button.
Logs are written to a log file of a different model.
Re: Action Button - Process Failed - with No Log
Posted: Fri May 03, 2024 11:41 am
by chewza
Thx all - got it sorted! Issue with named range in Excel